These links below will take you to the step by step guides for installing and troubleshooting your installation and setup of the Game Boy Color Q5 IPS LCD Kit. 

  • Test the kit before installation! Once the display is mounted it cannot always be safely removed. We ask that you test the kit by hooking it up before removing the screen protector and before fully mounting the display.
  • LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
  • Damage to console or LCD may occur if you do not trim the cartridge port pins. Exercise caution when trimming pins, wear eye protection to protect from pin debris when cutting the metal. Damage caused by these pins are not covered under our return or exchange policy.


Installation instructions.


https://cdn.shopify.com/s/files/1/0689/3143/files/Super_OSD_GBC_LCD_instruction_3cfa69aa-ac13-4816-940b-cc7c254586b0.jpg?v=1626787148


Screen Alignment/Adjustment instructions.


https://cdn.shopify.com/s/files/1/0689/3143/files/Super_OSD_GBC_Menu_instruction.jpg?v=1609345915


Brightness troubleshooting.


https://handheldlegend.freshdesk.com/support/solutions/articles/67000661891-game-boy-color-q5-brightness-troubleshooting


TRICK:

Curious where to trim your shell to create the appropriate viewing window? As a dry fit, backing still on the lens, place it into the shell and hold it up to a light. You can see the areas where the shell will need to be trimmed: