Important: Some installation videos on YouTube will have you snip off the supports that our 3D printed bracket uses. We suggest using the installation instructions provided below in conjunction with our aligning bracket.


Note

  • Test the kit before installation! Once the display is mounted it cannot always be safely removed. We ask that you test the kit by hooking it up before removing the screen protector and before fully mounting the display.
  • LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.


GUIDE NEEDS TO BE UPDATED, CYLINDERS HAVE BEEN REPLACED WITH PURCHASABLE BRACKET


DMG RETRO PIXEL INSTALL TUTORIAL



PS:

You can also print the fixing bracket to fix the LCD.